Urine analysis strips, 1 Parameter: ketone bodies Go-Keto 100 tests.
These strips are used daily and recommended by thousands of ketonics and healthcare professionals. Go-Keto Glucose and Ketone Urine Test Strips are convenient, easy to use and can provide fast results for glucose and ketone levels.
Directions for use:
Allow the strip, urine specimen and/or controls to reach room temperature (15-30ºC) before testing. The urine specimen should be collected in a clean, dry container and tested as soon as possible.
Remove the strip from the sealed container and use as soon as possible. Immediately close the container tightly after removing the required number of strips. Completely immerse the reagent areas of the strip in fresh, well-mixed urine and remove the strip immediately to avoid dissolving the reagents below.
While removing the strip from the urine, run the edge of the strip over the edge of the urine container to remove excess urine. Hold the strip horizontally and touch the edge of the strip to an absorbent material (e.g., a paper towel) to avoid mixing chemicals from adjacent reagent areas and/or soiling your hands with urine.
Compare the reagent areas with the corresponding color blocks on the container label at the specified times. Hold the strip close to the color blocks and match carefully.
Note: Results can be read up to 2 minutes after the specified times.
Storage:
Store as packaged in the closed container either at room temperature or refrigerated (2-30°C). Do not expose to direct sunlight. The strip is stable until the expiration date printed on the container label. Do not remove the desiccant. Remove only enough strips or use immediately. Replace the cap immediately and tightly. DO NOT FREEZE. Do not use after expiration date.
Note: Once the container has been opened, remaining strips are stable for up to 3 months. Stability may be reduced in high humidity conditions.
