Description
“The inhalation chamber is intended for use with inhaled inhalers (MDIs) to deliver an aerosol to the lungs as directed by a physician.
The device is intended for home and hospital use, for single use.
Carefully inspect the chamber and remove any contamination. before use When using a mask it must be securely attached to the mouthpiece remove the cover from the MDI and camera
If the camera is damaged, it must be replaced with a new one: the back of the camera and shake before use - Put the mouthpiece in your mouth and tighten your mouth around it. The mask should be fitted over the nose and mouth to ensure a perfect fit.
- Exhale calmly. At the beginning of the slow inhalation, press the MDI inhaler.
Then breathe slowly and deeply through the mouth until the inhalation is complete.
If possible, inhalation should be held for 5-10 seconds.
Otherwise, after depressing the MDI inhaler, squeeze the mouthpiece tightly, taking 2-3 breaths through the chamber.
- Breathe deeply. at the beginning of the slow inhalation, press the MDI inhaler and then make sure that when you inhale 5-6 inhalations.
Warnings:
1. The device must be replaced after 12 months of use.
2. Make sure the cleanup process is running correctly. Chambers or masks should not be boiled, sterilized or washed in the dishwasher.
3. Make sure your doctor's dosage instructions are followed.
4. Keep the camera away from children. The camera is not a toy.
5. Children or infants cannot use this device alone, and operations related to its operation must be carried out with the help of adults or doctors.
Careful.
1. The chamber is made of antistatic material to prevent the drug from depositing on the walls of the chamber.
2. This device is made of natural material
3. This device can only be used by one patient.
4. When not in use, store the device or mask in a clean area or in a plastic bag.
5. Operating / storage conditions: 5ordm;C-40ordm;C (41ordm;F-104ordm;F); 15-95% RH"
